Drilling Alaska: America Needs to Adopt Conservation Practices! Essay

Drilling Alaska I recently read an article in Scientific American (May 2001) titled â€Å"the arctic oil & wildlife refuge.† The article addresses the issue of whether or not science has the ability to clarify the potential economic benefits and the ecological risks of drilling into the nation’s last great coastal wilderness preserve. What I began to wonder after reading the article is, if we humans should continue our scientific and technological petroleum endeavors even though we are causing irreversible harm to our earth. My feeling is that we should not drill in Alaska’s Arctic. In the early twentieth century, science and technology brought the automobile. In less than one hundred years, humans especially Americans have grown increasingly dependant on the conveniences born from widespread use of the automobile. In turn Americans are the most reliant population in the world on petroleum. Last year, Americans consumed 19.5 million barrels per day. It is estimated that our use will rise to 23 million by 2010 (Gibbs 2001)! Our insatiable appetite for petroleum has sparked a fiery debate within this country and this congress on whether or not taping into the Arctic oil supply is necessary. Proponents of drilling cite that exploration and production can be done without causing any adverse impacts on the Arctic wildlife. Critics however believe drilling will cause unretractable consequences on the pristine Arctic ecosystem. The debate is now in the hands of Congress to decide. Senate bill S.389 could potentially open the 1002 Area of Alaska to oil and gas exploration and production. The bill would allow for the Bureau of Land Management to control activities to ensure that activities â€Å"will result in no significant a... ...y’s population is reliant on science and technology to get us through the challenges we face, I know that we can develop other means to meet our needs, conservation being the key. More Americans must learn to accept conservation as a science. Conservation on practices that require enormous amounts of petroleum and conservation of our environment must be adopted. It is amazing that the US, the most developed country in the world, is so far behind our friends in terms of conservation. It is about time we drill into the American conscious and extract conservative practices. While humans remain here on Earth we will further science and technology and hopefully our betterment will not come at the cost of our world. Work Cited Gibbs, W. Wayt. â€Å"the arctic oil & wildlife refuge.† Scientific American May 2001:pages 62-69. Drilling Alaska: America Needs to Adopt Conservation Practices! Essay Drilling Alaska I recently read an article in Scientific American (May 2001) titled â€Å"the arctic oil & wildlife refuge.† The article addresses the issue of whether or not science has the ability to clarify the potential economic benefits and the ecological risks of drilling into the nation’s last great coastal wilderness preserve. What I began to wonder after reading the article is, if we humans should continue our scientific and technological petroleum endeavors even though we are causing irreversible harm to our earth. My feeling is that we should not drill in Alaska’s Arctic. In the early twentieth century, science and technology brought the automobile. In less than one hundred years, humans especially Americans have grown increasingly dependant on the conveniences born from widespread use of the automobile. In turn Americans are the most reliant population in the world on petroleum. Last year, Americans consumed 19.5 million barrels per day. It is estimated that our use will rise to 23 million by 2010 (Gibbs 2001)! Our insatiable appetite for petroleum has sparked a fiery debate within this country and this congress on whether or not taping into the Arctic oil supply is necessary. Proponents of drilling cite that exploration and production can be done without causing any adverse impacts on the Arctic wildlife. Critics however believe drilling will cause unretractable consequences on the pristine Arctic ecosystem. The debate is now in the hands of Congress to decide. Senate bill S.389 could potentially open the 1002 Area of Alaska to oil and gas exploration and production. The bill would allow for the Bureau of Land Management to control activities to ensure that activities â€Å"will result in no significant a... ...y’s population is reliant on science and technology to get us through the challenges we face, I know that we can develop other means to meet our needs, conservation being the key. More Americans must learn to accept conservation as a science. Conservation on practices that require enormous amounts of petroleum and conservation of our environment must be adopted. It is amazing that the US, the most developed country in the world, is so far behind our friends in terms of conservation. It is about time we drill into the American conscious and extract conservative practices. While humans remain here on Earth we will further science and technology and hopefully our betterment will not come at the cost of our world. Work Cited Gibbs, W. Wayt. â€Å"the arctic oil & wildlife refuge.† Scientific American May 2001:pages 62-69.

The Cost of Discipleship Essay -- Papers

The Cost of Discipleship The definition of the word disciple means a follower or one who learns. Jesus chose several disciples to follow him and to go out and preach his teachings. We are told in the 'call of the disciples' in Mark's gospel that the men Jesus chose weren't special or significant in any way, the men he chose were just normal men consisting of fishermen and tax collectors. Jesus appoints his first four disciples, Simon, Andrew, James and John by simply saying: "Come follow me and I will make you fishers of men." Immediately, they left their things and followed a man they hardly knew. This is the only indication we get that the disciples were in a way special, because the disciples had the courage and trust in God follow Jesus. The same also occurred with the selection of the fifth disciple Levi who was later renamed Matthew. Jesus approaches Matthew in his tax collectors booth and says "follow me", Matthew then rises and follows Jesus. The selection of the disciples seems very strange as none of the...

Taste of Honey: From dependence to independence :: English Literature

Taste of Honey: From dependence to independence 'A Taste of Honey' was written by Shelagh Delaney when she was 18, and published in 1958. Four years later, in 1962, it was turned into a film. It shows life as it really was for many people in and around the slums of Salford, near Manchester, living with the poor housing and lack of opportunity. The characters are genuine; you can really believe in them. Some of the characters were totally different from the usual 'straight-laced' characters that were so common in the kitchen-sink dramas that were around at the time. For instance, a homosexual, a young pregnant unmarried girl, a semi-whore mother and a black sailor all living in the same areas, and some even living in the same houses as each other. This was completely different from the 'safe' plays of the time. There is hope in the play; the characters, especially Jo, are able to overcome their fears and problems and carry on with their lives. The characters in a taste of honey speak like typical working class people in the north of England. There are not many examples of regional dialect, but there are a few, such as when Helen says, 'Eee, there's a terrible draught,' showing that Helen is a resident of Lancashire. The characters drop letters, making them sound more common. There are many examples of this, including Jo saying, 'You packed 'em,' and Helen saying, 'Turn 'em all'. This shows that Helen and Jo are ordinary, common, working class or lower, people. The ancient Greeks believed that a play had to be realistic, and that to be realistic the action of the play should have one setting. The time the play took to act should be equal to the time covered in the plot and that the play should have only one main story. The Greeks called these ideas the 'three unties of time, action and place'. This is different to a taste of honey in that the play, although only having one main plot, has a sub-plot. The main story is the story of Jo, and the sub-plot being Helens story. There are many objects in the play which could contain a hidden meaning, from something a simple as darkness or a light bulb, to deeper things such as an eye patch or children singing. The list is endless. The very first instance of symbolism is the play's title, 'a taste of honey'. A taste is a very small amount for a short period of time. Honey is sweet, and therefore honey represents good. From Jo's point of view, her life is bad.

Medieval romance

In The â€Å"Monkeys paw† a family Is Just trying to get money to pay if their house. C. In The â€Å"Most Dangerous Game† General Croft Just wants to feel the excitement off dangerous hunt. D. Finally In â€Å"The Story of an Hour† a 17th century women Just wants to be tree trot her husbands control. Ill. 2nd body paragraph a. All of the stories use lots of in depth imagery to show characters motive for their actions. B. â€Å"The Monkeys Paw† shows imagery when the soldier takes out the paw and tells the story. This impels Mr.. White to want to use the monkey's paw. . â€Å"The Most Dangerous Game† Shows it through General Croft telling his story. He descriptively shows how me began to hunt humans, and how he needed to be challenged again. D. â€Å"The Story of an Hour† uses loads of imagery to show how Mrs.. Mallard came to her realization that she would be better off without her husband controlling her. That is why she is so happy. IV. 3r d body paragraph a. All three stories are similar in that they all end the same way. B. The main character gets what he wants, but has to pay the price. C.In † The Monkeys Paw† Mr.. White get his 200 pounds, but his son dies for it. D. In â€Å"The Most Dangerous Game† Croft gets the hunt he wanted, but Rainstorm kills him. E. Finally in â€Å"The Story of an Hour† Mrs.. Mallard ends up free, but only because she died. V. Conclusion that in every story characters get what the want, but not in the way they wanted it. C. D. Though they all differ in the way that each person in each story wants a different a. While the stories all end up almost the same they each end for completely efferent reasons. . In The â€Å"Monkeys paw' a family is Just trying to get money to pay the excitement of a dangerous hunt. D. Finally in â€Å"The Story of an Hour† a 17th century women Just wants to be free from her husbands control. Actions. B. â€Å"The Monkeys Paw' s hows imagery when the soldier takes out the paw and tells the story. This impels Mr.. White to want to use the monkeys paw. C. â€Å"The ‘V. 3rd body paragraph character gets what he wants, but has to pay the price. C. In † The Monkeys Paw' Mr..

Psychoanalytic Analysis Essay

Richard, 44 years old, was referred by his doctor who felt that he had a major drinking problem. Initially, Richard resisted seeing himself as a problem drinker and preferred the idea that he was depressed. Richard exhibits impulsive binge behavior, engages in frantic efforts to avoid feelings of loneliness, shows a pattern of unstable and intense interpersonal relationships, displays inappropriate anger, and manifests extreme mood swings. Nevertheless, it appears that Richard has no significant medical problems or medical history. Richards’s mother died when he was 10 and his father sent him to a private boarding school, feeling that he could not manage to bring up his son by himself. Richard felt that he was abandoned by both of his parents ? by his mother who died and left him and by his father, just when he had most needed his love, companionship and support. He has had three marriages, each of which ended when his wife left. Typically, each woman grew tired of his continual drinking binges and all that went with his alcoholism: getting fired from job after job, not being a father to his children, being abusive both verbally and physically to her and being extremely dependent on her. Consequently, Richard thinks that he did not have what it takes to keep a wife and eventually grew increasingly bitter towards women since they all left him when he needed them the most. In the aspect of his work, he feels a great deal of anger towards his former boss who fired him. He complains that when he was broke his boss took his job away from him and didn’t offer him support. Thus, in his eyes, important men always let him down including male friends who broke contact because of his drinking. Diagnosis (based on the criteria of manifestations), Psychodynamic Analysis, Use of Free Associations, Theoretical Treatment and Conclusion Based on the manifestations presented on the overview of Richard’s case, we can classify him to belong in the group of Psychiatric Disorders known as Personality Disorders. Personality Disorders are â€Å"pervasive chronic psychological disorders† characterized by an individual’s unique psychological traits and inability to form or maintain interpersonal relationships that revolve around the sphere of family, friends, and work environments ((MentalHelp. net, 2001). Richard’s salient manifestations are further classified into the Borderline type of Personality Disorder. Dombeck (2001), in his article â€Å"Borderline Personality Disorder Symptoms† enlisted the following symptoms, which are usually seen in persons with this state: †¢ â€Å"Frantic efforts to avoid real or imagined abandonment. A pattern of unstable and intense interpersonal relationships characterized by alternating between extremes of idealization and devaluation †¢ Identity disturbance: markedly and persistently unstable self-image or sense of self †¢ Impulsivity in at least two areas that are potentially self-damaging (e. g. , spending, sex, substance abuse, reckless driving, binge eating) †¢ Recurrent suicidal behavior, gestures, or threats, or self-mutilating behavior †¢ Affective instability due to a marked reactivity of mood (e. g. , intense episodic dysphoria, irritability, or anxiety usually lasting a few hours and only rarely more than a few days) A chronic feelings of emptiness †¢ Inappropriate, intense anger or difficulty controlling anger (e. g. , frequent displays of temper, constant anger, recurrent physical fights) transient, stress-related paranoid ideation or severe dissociative symptoms† (Criteria summarized from: American Psychiatric Association. (1994). Diagnostic and statistical manual of mental disorders, fourth edition. Washington, DC: American Psychiatric Association. ). Hence, as we can see in the aforementioned clinical manifestations, Richard can truly belong in this type of disorder.  A question may be generated in our minds as to the factors that can trigger the occurrence and aggravation of this disorder in an individual. In line with this, we can device the Psychodynamic approach, which will lead us to trace and analyze the advent of this condition to a person. According to Ballas (2006), one of the root causes or risk factors of Borderline Personality Disorder (BPD) is abandonment issues in childhood. As we can observe, we can directly relate this factor to Richard’s case since he perceived her mother’s death and his father’s decision to send him to the boarding school as abandonment. This issue has affected him in these ways: when his mother died, there was somewhat a feeling of loss as any individual could have when a loved one passes away. However, this feeling was aggravated by the decision of his father. Instead of comforting him, sending him away was the remedy because his father in turn had doubts if he can bring up his son properly. The decision of father was not helpful to the grieving Richard who absolutely by that time needed the support system to help him make it through. Further, this may have caused a significant anxiety, which can prompt the Richard’s disorder. Hence, this disorder as anxiety-related. As defined by Gale (1998), anxiety is an unconscious strategy in which an individual would want to avoid a negative stimulus in view of the fact that it causes a somewhat threat on his or her ego integrity. This must have played a role in Richard’s condition. In this way, defense mechanisms are the way to unleash their feeling within. Defense mechanism is defined and expounded as a psychological mechanism to lessen tension and to protect the ego from potential threat. Defense mechanisms can help an individual cope with anxiety or it can also be harmful. The defense mechanisms that we will be dealing with are still based on the definitions on the same article. As we can evaluate Richard’s symptoms, we can clearly discern the defense mechanisms that he used. Denial was one of them. It was characterized by his resistance to the fact that the doctor said that he has a major drinking problem. Denial was his attempt to eliminate the threatening information that he was confronted. Projection was also used in the aspect of his unsuccessful marriages. It was characterized by blaming his wives who left him to cover up the feeling of inadequacy as a husband to them. In other words, he projected his mistakes to other people. He also used displacement as a defense mechanism, as revealed by his an abusive husband and father. On the other hand, he exhibited five of the criteria for the disorder: impulsive binge behavior, frantic efforts to avoid feelings of loneliness, inappropriate anger, pattern of unstable and intense interpersonal relationships and extreme mood swings. The use of free association is helpful in this case as it can help to connect the details of the Richard’s thoughts and experiences. According to Chiriac (translation by Cristea, 2008), in her article â€Å"About the Free Associations Method†, free associations are useful in a way that â€Å"thoughts are autonomously activated by chance verbal associations, influence conscious psychic life in a frequently dramatic manner and the task of psychoanalysis is to bring such complexes to the surface of conscious mind and eventually integrate them into the patient’s life†. Thus, Richard’s thought may have been unveiled and interpreted by the doctor with the use of this method. Levin (2001) shared some important details in the treatment of BPD in her article in MentalHealth. et. She said that the treatment of choice for BPD, as with most personality disorders, is Psychotherapy. Further, it must be noted that making contract with the individuals with suicidal attempts is essential and must be taken as an initial action. Medications may be prescribed. However, there are still controversies on this matter. She also emphasized that the therapists or the clinicians must be firm in handling this individuals because BPD patients are difficult to deal with. As she recommended, the most successful and effective comprehensive approach to date has been Marsha Linehan’s Dialectical Behavior Therapy. This psychotherapy seeks to teach the client how to learn to better take control of their lives, their emotions, and themselves through self-knowledge, emotion regulation, and cognitive restructuring and is often conducted within a group setting. In addition, hospitalization will also be of great help since it provides a highly-structured environment necessary for the individual’s independence. As with this disorder, medications are not specifically prescribed. Nevertheless, some medications such as antidepressant and anti-anxiety agents may be necessary to alleviate associated symptoms. Hence, Levin (2001) also emphasized the importance of self-help and support groups for patient’s suffering from this disorder. Therefore, a sufficient understanding of the case has been achieved by those aforementioned points that have been discussed. We have traced how Richard has gotten his condition through a careful analysis of the objective manifestations, which have been presented in the overview of this study. We can associate how the events in Richard’s childhood contributed to the intrapsychic conflicts and anxiety that had developed in him in the course of time. We have utilized some defense mechanism that he used in order to protect his ego from anxiety-provoking stimuli. In this way, we knew how his past had greatly affected his interpersonal relationships, which include that of his previous wives and even on his children. Moreover, the symptoms that he manifested were useful in order for us to identify the disorder that he is into and so we knew that he has five of the necessary criteria to classify him in the Borderline type of Personality Disorders. On the hand, the use of free association method is valuable to recognize the underlying details behind Richard’s disorder. Finally, we learned how psychotherapy is necessary to treat his psychiatric condition, how support-system plays a vital role in achieving proper treatment goal and how hospitalization is necessary to facilitate structured environment for Richard. Thus, we learned how the living environment can truly impact a person’s psychological aspect, or should we say his integrity as a holistic being, throughout his lifetime.

Liberalism

This week essay based on Gerald Macaulay, last week's articles Essay Assignment November 4th Instructions, Guidelines Topics Opinion based on research (secondary) Extension of a week to November 1 lath for any reason 1. What are ideologies 2. Key Feature of Ideologies 3. What Is â€Å"special† about Ideologies? 4. What is the history of the concept? 5. Positive vs.. Negative conception of ideology 6.Complications of studying them What are ideologies? Competing conceptual frameworks Clusters/composites of political beliefs, values and ideas a pattern of social, political, economic, technological and philosophical beliefs that help us organize the world around us. † P. X Grounded in beliefs about human nature and social possibility (what is, and what could be) What do Ideologies do?Explain or Inform – what Is going on? Judge-what should I think about this? Guide political actions- what should do about this? Inform social relations-Who are my allies? My enemies? What Is my relationship to other In this? Etc. Key Features of ideologies Historically contingent-constantly changing/shifting Changes In central concepts (meanings) and also In relation of concepts to other concepts (e. G. Allegations of freedom to equality) Include â€Å"core† and â€Å"adjacent† concepts Both rational and emotional Normative and prescriptive In various affinities/alliances with each other (historically shifting) Include a spectrum of views Frequently claim to be true, to be non-ideological 1 OFF Differentiating ideologies from political theories/philosophies 1) Typicality 2) Influence 3) Conceptual Creativity 4) Communicability History of Ideologies Link to democracy, to concern with public opinion ) As a scientific term of study.

Central Heating

THE HISTORY OF CENTRAL HEATING Brittany Science, 4th, Mr. Leetch, History of an Invention 2/8/13 The History of Central Heating Systems By Brittany Hicken I. Who invented the central heating system? A. We don’t know exactly who invented the first one B. Ancient Romans created the hypocaust C. Greeks created their own version of the hypocaust D. Sergius Orata (80 B. C. ) E. Louis Savot- French (1600) F. Dalsme (1600) G. Dr. John Clarke (1652) H. Benjamin Thompson (1796) I. Count Rumford (1796) J. William Cook (1745) K. William Strutt (1805) L. Eliphalet Knott (1833) M. Isaac Orr (1836) N. Professor Warren Johnson (1873)O. Milton Fessler (1905-1908) II. What were the changes over time? A. It was first the hypocaust, we don’t know when it was invented B. Fixed central hearths date back to 2500 B. C. , they were excavated in Greece C. An under floor heating system was installed in the house of King Arzawa in Beycesutan, Turkey in 1300 B. C. D. The Romans brought technology to a high standard, by creating systems designed by Sergius Orata E. Crude fireplaces were made around 800 A. D. these were widespread in Europe in the 1300’s F. After the 14th century, the next important event was the chimney.Early chimneys were large, so to allow chimney sweepers to climb into them G. Masonry stoves became very common in the 1500’s H. Louis Savot invented the raised grate system and designed a circulating fireplace in the early 1600’s I. The way of stove heating soon had advanced. The first free standing stove, or not connected to anything so it’s not mounted to anything, was the Furnus Acapnos or the smokeless stove invented by Dalsme in France in the later days of 1600’s J. The earliest stove to be introduced to North America is the iron box stove invented by Dr. John Clarke in about 1652 K.William Cook was the first to propose the way of steam heating in 1745 L. M. Bonne constructed an actual hot water heating system instead o f the steam heating system in the late 1700’s M. William Strutt invented a warm air furnace that included of a riveted, wrought iron air chamber encased with bricks. The rivets help seal the air chamber to be air tight, in 1805. This chamber has ducts fed with heated air into rooms. Strutt’s hot air furnaces were referred to as cockle, belper, or derby stoves N. In 1833, Eliphalet Knott invented the stove with base burners O.In 1836, Isaac Orr invented the airtight stove so there would be no heat loss on the inside chamber P. Professor Warren Johnson taught at a school up in Wisconsin and back then the only way to change the temperature was to run downstairs and tell the janitor to turn the wheel in a way to let either more steam or less steam into the room. He later created and patented a thermostat that relied on compressed air to make the valves work. He then later created the Johnson Electric Service company Q. â€Å"Coal-less† Mondays were introduced in 191 7 saving coal and stimulating the use for oil and gas since there wasn’t much coal around.R. Milton Fessler invented residential oil burner in California so that residents could have their house easily heated without stoking coal ever hour between 1905-1908 S. By 1926, the Electric Refrigeration News began to publish, â€Å"heating had advanced from the campfire to something so silent, so automatic that we just take for granted and ‘just turn the heat on’ III. When did initially stop changing and industries stated introducing something different and not a huge improvement? A. From the mid 1920’s-1936 B. People started to take the silent heating system for granted C.People were inventing little accessories or little parts to go on to the latest thing but nothing much bigger or more important happened IV. Where did the inventions take place? A. Rome B. Greece C. France D. The United States E. Turkey F. Europe V. Why it was initially created? A. To heat bath water in the Roman Empire B. To heat homes so that people could live comfortably C. To heat specific rooms D. The thermostat was created to control the amount of wanted heat in any specific room, or house VI. What was the hypocaust and how did the hypocaust work? A. The word â€Å"hypocaust† refers to a subfloor radiant heating system B.The word hypocaust come from the Latin word â€Å"Hypocaustum† which meant burning underneath C. These were important to ancient romans because it heated their baths and as well as large rooms D. The small pillars of stacked bricks would have supported a fire proof floor that was heated by air circulation under the floor in a chamber with an external furnace E. The hot gases at the top of this hypocaust below the floor would have been up to about 400 degrees Fahrenheit F. Addition to the hypocaust, some romans had hollow walls to help keep even temperature and prevent condensationWorks Cited By Brittany Hicken A Brief History of Heatin g and Cooling America 0Homes. †Ã‚  Sustainable Dwelling. † William Furr, 10 Jan. 2011. Web. 27 Jan. 2013. â€Å"Archrnews. com. †Ã‚  Archrnews. com. N. p. , 12 Nov. 2001. Web. 4 Jan. 2013. http://www. achrnews. com/articles/an-early-history-of-comfort-heating â€Å"A Short History of Central Heating. †Ã‚  Taco. N. p. , 2012. Web. 20 Jan. 2013. â€Å"Hypocaust. †Ã‚  About. com. N. s. Gill, n. . Web. 11 Jan. 3013. Duffy, Catherine. â€Å"Who Invented the Central Heating System? †Ã‚  EHow. Demand Media, 04 Nov. 2009. Web. 20 Jan. 2013. This paragraph is a run though of the timeline events. Going all the way back to 3000 B. C. the first Hypocaust was born. Ancient Romans had invented the hypocaust. The hypocaust is an under floor heating system that is a chamber that collects heat and leaves it under there. Going up to 2500 B. C. the first fixed central hearths were first excavated in Greece. In 1300 B. C. King Arzawa had an under floor heatin g system installed into his palace in Turkey. Later in 80 B. C. Sergius Orata started to create designs for heating systems and brought technology to the Romans. Crude fireplaces were made around 800 A. D. and were later widely spread throughout Europe in the 1300’s. The chimney was invented around the 1400’s. They were large in diameter so that the Chimney Sweepers could fit up into them to clean them out. 100 years later in 1500, masonry stoves became the â€Å"new thing† to have.They also became very common. Louis Savot invented the raise gate system and designed a circulating fireplace. In early 1600’s, the first standing stove, or not connected to a wall or mounted to anything, was the Furnus Acapnos, or the smokeless stove, invented by Dalsme. He also introduced fresh fuel in the same opening as combustion air, directing all combustion products over already-burning fuel, a design that ensured complete combustion. The iron box stove, the earliest sto ve to be introduced into North America, was invented by Dr. John Clarke.William cook was the first to propose the way of using steam to heat up rooms, in 1745. In the late 1700’s, M Bonne invented an actual hot water heating system instead of William Cook’s steam heating system. In 1805, William Strutt invented a warm air furnace that had a riveted, wrought iron air chamber encased with bricks. This chamber had ducts that fed into rooms and blew heated air into the rooms. The way this chamber was built was to keep the hot air from escaping from the chamber and having heat loss. They were referred to as cockle, belper, or derby stoves.Isaac Orr invented the airtight stove so there would be no heat loss inside the chamber in 1836. Professor Warren Johnson taught at a school in Wisconsin, where the only means of room temperature control was to tell the janitor to go to the basement and adjust steam valves. Johnson developed an electric annunciator system in 1873 that was used to signal the janitor when heat needed adjusting. He continued experimenting and in 1885, patented a thermostat that relied on compressed air to operate steam valves. He then established the Johnson Electric Service Co. to manufacture and install his system.Johnson went on to invent the humidistat for control of the humidity in buildings in 1905. In 1905-1908, Milton Fessler invented a residential oil burner so that residents could have their own house heated easily without stoking coal in a fireplace every hour. Coal-less Mondays were introduced in 1917 to save coal and stimulate the use for oil and gas since there wasn’t much coal around or to be found regularly. In 1926, the Electric Refrigeration News began to publish that heating had advanced from the campfire in a cave, to something so silent, so unnoticeable.And in present day, thermostat controls air and ducts are fed in a way we can’t see the m and as well as fed to each room through a vent in which air i s blown out of. We take advantage of just â€Å"turning on the heat† every day that we don’t even bother to thing what had to happen way back when to heat thing up. The way of heating has been a system that not everyone thinks about. It has gone from the campfire, to the hypocaust, to stoves, to compressed valves, to thermostats, to an automatic heating with the push of a button. Over time, the way of heating has improved and impressed many along the way.It used to be having a chimney and stoking coals for five minutes ever hour just to keep the coals burning and hot and giving off heat. To progress this way of heating, there cannot be only one inventor. There are many who have created accessories, or major parts to different systems. The inventors go from ancient Roman empires and ancient Greek empires to people we have never heard of, but have improved life as we know it tremendously. This is the way of heating. Going into B. C. years, there were some unknown dates a nd some known dates. First was campfire.We all have heard off the story where cavemen are in a stark cold cave with a campfire. That’s just an obvious fact. Later on the hypocaust was made my ancient Romans and ancient Greeks. The word hypocaust refers to a subfloor radiant heating system: suspended floor with space for gases and hot smoke. The word hypocaust comes from the Latin  word Hypocaustum  which originally meant a ‘burning underneath'. Hypocausts were very important to Roman’s system of heating. The hypocaust heated baths and large rooms. Along with the hypocaust, there were sometimes hollow walls in ancient structures.These hollow walls would help maintain even temperatures as well as eliminate condensation. The small pillars of stacked bricks would have supported a fireproof floor that was heated by means of air circulation in the under floor chamber with an external furnace as heat source. The art and science of the hypocaust systems was lost afte r the fall of the Roman Empire. Western heating science had advanced very little in the period of the Dark Ages. Around 2500B. C fixed central hearths were excavated in Greece. In 80 B. C. Sergius Orata brought high art designs to Roman technology.At first Romans were only heating up their floors, but later used heated walls and some were designed as early as warm air heating systems. By this, introducing heated air through floor openings. This is the end of the B. C. heating ways. Now going into the A. D. times, from 1600-1800 specifically. In the late 1600’s, Dalsme invented the first freestanding stove, not mounted to a wall, called the Furnus Acapnos to the smokeless stove. He also introduced fresh fuel in the same combustion air directing all products over already burning fuel, a design that ensured itself. The smokeless stove was a great advance but, it was accepted slowly.The earliest stove introduced into North America was the cast iron box stove which was invented by Dr. John Clarke in 1652. This kind of stove was originally made in Holland and later imported into England after1600. Louis Savot invented a raised gate system and designed a circulating fireplace. He used a hollow iron bottom and back in a hearth, at which cold air entered the bottom, was warmed, and entered the room through openings, in early 1600’s. In 1653, Sir Hugh Platt proposed using hot water to dry gun powder and Sir Martin Triewald proposed warming greenhouses with hot water.This might be referred to as the hydronic system, which is the heating of an object by water. In 1735, John Desaguiliers designed the first modern heating blower which was turned by hand by an operator referred to as the ventilator for the British Houses of Parliament. The design of centrifugal, acting from or away from the center, blowers was continually improved in England and Europe during 18-19 century. The early fans were mostly operated by steam engines. In the late 1700’s, M. Bonn e in France constructed an actual hot water heating system using a boiler.The French idea was introduced into England by the Marquis de Chabannes later in 1816. By the 1790’s, the steam heating way had only progressed in England, being used to heat mills and factories. The advantage of steam heating is the avoidance of the expense of insurance. This is the end of the 16th and 17th century. Moving ahead to the 18th and 19th century, there were many important events, inventions, and inventors. In England at about 1805, William Strutt had invented at warm air furnace that included a riveted wrought iron air chamber that is encased with bricks.The design had a couple inches of space between the brick and iron chamber allows air to circulate. A large space on the outside is split horizontally on two sections, the lower for cool air and the upper for heated air. Cool air moves from the lower chamber through the openings and moved out through the upper openings into the heated air c hamber. As well as ducts were fed into rooms in which heated air is blown out of them. His hot air furnaces were referred to as cockle, belper, or derby stoves.December of 1815, Marquis de Chabannes obtained a patent for a method of conducting air, and regulating the temperatures in houses or buildings. Hot air systems were introduced in the U. S. before 1820. The fist building to be centrally heated was the Massachusetts Medical College in 1816. In 1831, Angier Perkins realized the drawbacks of bulky heating systems. So he designed a high pressure hot water system using a small diameter, thick walled wrought iron pipe that he patented. His system heated water in pipe coils placed in a furnace, then circulated hot water to coils of pipe in the rooms to be heated.In 1833, Eliphalet Knott invented the base burners for stoves, and in 1836, Isaac Orr invented the air tight stove so that there would be no heat loss. Joseph Nason and James Walworth introduced the Perkins method of high pr essure hot water heating system in the U. S†¦ But in that same year of 1842, the method was not used. The use of hot water systems had been limited till 1880’s when that had surprisingly become popular. Steam heating for residents had rapidly declined and hot water became the dominant method especially in the eastern part of the United States.Joseph and James installed steam systems afterward, using small diameter wrought iron pipes. They installed numerous amounts of steam systems in large buildings, including the White House and the Capitol building. In 1846, James and Nason installed the first fan type system for the United States Customs House in Boston. Later in 1849, F. P. Oliver had invented a stove with thermostatic draft control. By 1851, catalogs started to list cast iron registers, which are often 12-by-24-inch grills covering a large air-intake tube. Outflow vents vary in size depending on the room.A common size is 10 by 12 inches for most living spaces, avai lable in black, white, finished, gold, bronze, or just with nickel plating. They would package them with straw in a wooden crate. Packing was expensive. Stephen Gold was a Connecticut stove maker who began experimenting. The steam heating systems seemed too complicated and unsafe, but furnaces had seemed completely uncomplicated and very safe. Many people were uncomfortable in building heated by air because they had seamed scorched. Gold had overcome these issues and was granted a patent for improvement in warming houses by steam.Gold’s system was unique at the time. Large steam systems used coils or rows of pipe to heat rooms, while Gold used the first radiator, a device consisting of two dimpled iron sheets that were riveted together at dimples. The edges were rolled over with a piece of cord as a gasket, which is a rubber seal. Gold’s radiator came to be called â€Å"the mattress radiator† due to the way it looked, in 1854. In the same year, Gold invented a b oiler which was made of wrought iron and included a draft regulator along with a water valve.This system was later manufactured by Connecticut Steam Heating Company. Radiators date to 1863. Joseph Nason and a new face of Robert Briggs patented a new design including vertical wrought iron tubes screwed into a cast iron base. The golden age for warm air furnaces was after the Civil War. In 1869 a shoemaker by the name of Benjamin F. Sturtevant patented a combination fan and heat exchanger for two purposes: 1) for cooling 2) for heating. He established a company to manufacture and sell fans and heating systems. Here is a story that took place in 1873.Professor Warren Johnson taught at a school in Wisconsin where the only way to change the temperature was to run down to the janitor and have him turn the valves of air to change it to either warm or cool. Johnson developed an electric annunciator, which is electronic signaling device, system that was used to signal the janitor when heatin g need to be adjusted. In 1885, he created and patented a thermostat that relied on compressed air to operate the valves. He later established the Johnson Electric Service Company to manufacture and in install his systems. By 1874, Nelson Bundy invented the most popular cast iron radiator.In 1886, Albert Butz patented a thermostat that controlled damp drafts. The thermostat was electric, using battery to activate a spring loaded motor. In the 1890’s, the heating systems were quite sophisticated. Some included thermostatic and zone control, which is a forced air system. All of the early inventions of forced air systems had concerned themselves with large buildings. These combinations of the 1890’s of a fan and a heater were referred to as the plenum or the hot blast systems. In 1895, Charles Foster patented a damper type register. In 1899, Novelty Manufacturing Company was the first to make the steel register.The most successful hot blast system was the Vento sectional cast iron surface invented by John Spear in 1903, which was manufactured by American Radiator Company. Professor Warren Johnson went to invent the humidistat to control the humidity of a home in 1905. In that same year, manufacturers were frightened and formed the Federal Furnace League to elevate warm air heating to the rightfully deserved position. In 1905-1908, Milton Fessler invented a residential oil burner so that residents could have their own house heated easily without stoking coal in a fireplace every hour.During 1912, residents and homeowners had to wake up early to stoke the coal in the fire and replace the coal with fresh coal. Guesswork and experience helped tell how much coal to use. The first electric coal stoker that was controlled by a thermostat was invented in 1912, and by 1920 electric coal stokers could be found by anyone. During WWI, there was a coal shortage and the government had to find a way to conserve energy gave a slight nudge to the automatic systems. Lawrence Soule improved his idea of Aerofin heating surfaces. This Aerofin idea used spirally wrapped copper sheets to produce a light weight eat exchanger, during the 1920’s. After WWI, Butz Thermoelectric Regulator Company had pushed the idea of oil burner controls and had met with the Honeywell Heating Specialties in 1927 to form the Minneapolis Honeywell Regulator Company, or know to us today as Honeywell Incorporated. The heating systems of the 19th century operated with a low pressure, only using one to two pipes and a boiler or steam engine for the steam source. This is pretty much the last of the 18th-19th century events and inventions. This last paragraph explains the inventions and events in the 20th century.There are four main different types of modern central heating, consisting of gas and oil burners, solid fuel central heating, radiators, and electric heating. Gas and oil burners can be chimneys because they use gas to and oil to burn the wood to make a fire, wh ich warms up the room. Solid fuel central heating systems provide hot water, warm water, or any kind of heated liquid. Radiators  are heat exchangers used to transfer thermal energy from one medium to another for the purpose of cooling and heating. They distribute the heat by natural air circulation.The process of electric heating involves electrical energy being converted to heat through an electrical appliance. Other ways to heat homes are wood stoves, forced air systems, and by radiant heat. We also use thermostats that just â€Å"change† the temperature of rooms by the push of a button, that we often just take advantage of it. Houses often had ducts that come from a furnace that go to each room and blow air when you change the temperature on the thermostat. Some houses have a large panel of widows instead of a wall and the suns radiation waves go through the window and transfer into radiant heat to warm out the house.Another system houses have is called the forced air s ystem. Air is pushed by fans into a furnace and when it comes out, there are more fans after the furnace to push the air down the ducts and into the vents which lead into the room. This leads up to the year of 2013. So as it’s obvious, central heating has come a long way and improved much over the years. Many are impressed by this complicated technology and impressed by the intricate designs and inventions over the years. As spoiled people with high expectations of high quality technology, we have taken advantage of the heating systems.We just â€Å"turn on the heat† or â€Å"turn on the AC† and not even thinking about what has had to happen for this technology to come up to where it is. Heating is very important because without it we would not exist. We would freeze to death, literally. We owe a lot of thanks to all the inventors way back then who made this invention a lifestyle and a luxury. Heating has advanced so tremendously, from the campfire in a cave to something so silent so unnoticeable in life, from the hypocausts to the furnace, from the freestanding stoves to the chimneys.When we use heat or use a thermostat, we don’t tend to think about how heat has progressed. We think about the necessity of warmth, and how we are going to â€Å"freeze to death. † This paper and research has made me more aware of what happened for society to get heat, and has made me appreciate what I have. Fifty-four percent of the energy used in the average home is for heating and cooling rooms, and there are 114,199,622 households in the US as of the 2010 census. That’s a lot of energy used! The most simplistic way to put it is that we take advantage of things we have every day. I am thankful for heat, are you?